SC 500

Automatic side seal machine for shrink films as well as not shrink films. High performance level.

The automatic SC 500 continuous side seal machine has been designed to pack a great range of products whatever might be the length, with shrink and non shrink films, achieving productions up to 125 cycles/min.
With simple regulations, quickly adapts to the different products to be wrapped, without need of tools. Side sealed packs avoid seals over the top and bottom of the package, allowing a clear view of the product.

An industrial PC control system includes a simple and quick communication via touch screen, providing constant complete diagnostics of the machine status and the control parameters.

  • High quality packaging without seal tensions and intermediate belt.
  • Automatic in-line conveyor belt feeding system with product separation and alignment and manual conveyor width regulation.
  • Motorized 90º reel holder with adjustable mechanical perforation and end-of-film detection.
  • In feed moving belt to make the change and load of film easier.
  • Motorized triangle frame height.
  • Intermittent working mode: pack after pack.
  • Side seal with heated rollers with temperature regulation.
  • Cross seal and cut by hot knife with temperature regulations and opening at any height.
  • Automatic adjustment of the sealing height.
  • Automatic film scrap wheel with easy access. Film distribution device and film break detection.
  • "No product - No bag" device.
  • 5" touch screen industrial PC control, for up to 100 different product format memory and operation diagnosis.
  • Protections and safety systems according to CE regulations.
  • Automatic pack format adjustment.
  • Cross sealing bar and side seal for PE.
  • Film folding system from flat to centrefold.Perforación neumática y/o en caliente del film.
  • Pneumatic hole punch and/or hot film perforation.
  • Intermediate aspiration belt for light product transfer.
  • Easy opening package device. Device for unstable products.
  • Double reel holder.
  • End-of-film light and sound alarm.
  • Film centring device for printed film.
  • Machine direction: from left to right.
  • Stainless steel version.
  • Different feeding and exit elements (feeders, printers, labellers, conveyors…)
  • MODEM for failure diagnostic.

Contact